Specification
Material: Nylon Wire, ABS, Iron
Process: Painting
Color: Black
Style: Retro
Indoor/Outdoor Usage: Indoor
Control Method: Remote Control
Batteries Type: 1*AAA Batteries (Included)
Recommended Uses for Product: Air Circulation, Lighting
Installation Required: Yes
Mounting Type: Ceiling Mount
Light Source: 4* E26 Bulbs (Not Included)
Suitable Area: 8-10㎡/86.11-107.64ft²
Max Power(Each): 40W
Motor Type: Pure Copper
Motor Power: 45W
Noise: About 35dB
Timing: 1/2/4/8 Hours
Voltage: 110V
Number of Fan Blades: 3
Number of Gears: 3
Efficiency: E
Remote Control Distance: 3-5m/9.8-16ft
Rod Length: 12.5cm/4.92in, 25cm/9.84in
Base Diameter: 15cm/5.9in
Product Size(D*H): 46*13cm/18*5.1in

Package Included
1x Ceiling Fan Light
1x Remote Control
1x English Manual
1x AAA Battery
All Accessories for Assembly

Details
Solid Base: The thickened and enlarged ceiling base (diameter: 5.9in) will bring stronger load-bearing capacity and stability.

Smooth Edges: The smooth and burr-free edges will better care for your skin during installation and cleaning while enhancing the beauty of this product.

Standard Lamp Holder: With standard E26 lamp holders, it is compatible with various E26 bulbs(LED, incandescent lamp, fluorescent lamp, halogen lamp) for replacement of bulbs.

Application
It is suitable for spaces such as hallways, living rooms, bedrooms, study rooms, balconies, bars, aisles, foyers, hotels, restaurants, corridors, cafes, dining rooms, children's rooms, game rooms, nursing rooms, kindergartens, and libraries.

Notes
1.For a safe and secure installation, please ensure that the electrical box is firmly mounted and properly attached to a structural part of the building. Please make sure that all wires are connected. When unpacking, be careful not to pull with the wires as a bad connection may result. Please do not turn on the power until fully assembled. We recommend installation by professionals.
2.This product does not include a light bulb. Please prepare four E26 bulbs in advance.
3.Please do not install the lamp next to the air conditioner or heater, which will affect the service life of the lamp. Please wear electric insulation gloves (not included) and avoid scratching the surface of the lamp plate and the electric wire when installing. Please make sure that the power supply has been cut off before installation, and conduct a power test before installation.
4.Please use the lamp within the applicable voltage range and clean it regularly. Please cut off the power supply when you clean the light or replace light bulbs. Please wipe with a soft and dry cloth, it is not suitable to clean with cleaning agents and water.
5.If necessary, please disassemble the fan blades under professional guidance.
6.Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.